|
NUTECH 2000
Current
Category
JOE CELL KITS & MANUALS
|
HOW TO RUN YOUR CAR ON ZERO POINT ENERGY
|
|
 |
Weight 146 gm 29 Pages A3 Stapled
Author Barry Hilton Published by Nutech 2000 - 1998.
Probably the first 'HOW TO' manual for a FREE ENERGY device where experimenter's actually had success.
|
|
EXPERIMENTERS GUIDE TO THE JOE CELL
|
|
 |
Weight 350 gm 121 pages Spiral Bound
49 Photos. Author - Alex Schiffer.
Published by Nutech 2000 - 1999
The first time that such a detailed step by step instruction manual has been published for tapping into FREE ENERGY.
|
|
Experimentalfuhrer fur die JOE ZELLE
|
|
 |
EXPERIMENTER'S GUIDE TO THE JOE CELL
GERMAN TRANSLATION by Claudio Romanazzi
Published by RADIONIK VERLAG
Spiral bound. 118 pages. 49 Photos.
The first time that such a detailed step by step instruction manual has been published for tapping into FREE ENERGY.Many theories now abound as to how the Joe cell functions. This project is a wonderful way to explore the mysteries of Energy, Orgone and the mysterious nature of water.
Please read on.
|
|
OUT OF THE HORSES MOUTH - TAPE ONE
|
|
 |
TAPE ONE Weight 330 gm Video VHS FORMAT - Pal / NTSC ( USA / Canada )
* Please specify your FORMAT.
Includes 'IT RUNS ON WATER' TV Docu compared by Arthur C. Clarke. The Stan Meyer Story. Released just prior to his untimely death. 30 mins
|
|
OUT OF THE HORSES MOUTH - TAPE TWO
|
|
 |
TAPE TWO Weight 330 gm Video VHS FORMAT - Pal / NTSC ( USA / Canada )
* Please specify your FORMAT.
This tape continues on from tape one where Joe is in the back shed at Barry Hilton's getting the third degree on the finer points of cell construction.
|
|
STAINLESS STEEL PRESS FIT CONE 4 inch
|
|
 |
'JOE CELL' TOP PRESS FIT CONE - 4 inch
As of June 2001 we are happy to announce that we can supply a PRESS ON CONE top for the cell outer cylinder. The apex angle is set at 57 degrees as recommended by Alex Schiffer in his book 'EXPERIMENTER'S GUIDE TO THE JOE CELL'.
The 'PRESS ON CONE' has been Heat Treated to minimise paramagnetism.
Click for more info:
|
|
STAINLESS STEEL PRESS FIT CONE 5 inch
|
|
 |
'JOE CELL' TOP PRESS FIT CONE - 5 inch
As of June 2001 we are happy to announce that we can supply a PRESS ON CONE top for the cell outer cylinder. The apex angle is set at 57 degrees as recommended by Alex Schiffer in his book 'EXPERIMENTER'S GUIDE TO THE JOE CELL'. Click for more info:
|
|
'OUTER CANNISTER' - 4 x 7
|
|
 |
'JOE CELL CANNISTER' - 4"Dia x 7" High
This Cannister is suitable for the 5 inch high inner tubes: 1", 2" and 3" Dia.
The 4 inch Cannister has an END CAP welded on and is Heat Treated to eliminate the paramagnetism. It is beautifully finished and Highly Polished ready for assembkly. The Base has been pre-drilled ready to fit your 'CATHODE STUD ASSEMBLY'.
|
|
'OUTER CANNISTER' 4 X 10
|
|
 |
'JOE CELL CANNISTER' - 4"Dia x 10" High
This Cannister is suitable for the 8 inch high inner tubes: 1", 2" and 3" Dia.
The 4 inch Cannister has an END CAP welded on and is Heat Treated to eliminate the paramagnetism. It is beautifully finished and Highly Polished ready for assembkly. The Base has been pre-drilled ready to fit your 'CATHODE STUD ASSEMBLY'.
|
|
'OUTER CANNISTER' 5 X 7
|
|
 |
'JOE CELL CANNISTER' - 5"Dia x 7" High
This Cannister is suitable for the 5 inch high inner tubes: 1", 2" ,3" and 4" Dia.
The 5 inch Cannister has an END CAP welded on and is Heat Treated to eliminate the paramagnetism. It is beautifully finished and Highly Polished ready for assembly. The Base has been pre-drilled ready to fit your 'CATHODE STUD ASSEMBLY'.
|
|
'OUTER CANNISTER' 5 X 10
|
|
|
'JOE CELL CANNISTER' - 5"Dia x 10" High
This Cannister is suitable for the 5 inch high inner tubes: 1", 2" ,3" and 4" Dia.
The 5 inch Cannister has an END CAP welded on and is Heat Treated to eliminate the paramagnetism. It is beautifully finished and Highly Polished ready for assembly. The Base has been pre-drilled ready to fit your 'CATHODE STUD ASSEMBLY'.
|
|
'JOE CELL 4" INNER TUBE SET ( 4x5)
|
|
 |
INNER TUBES 5".
This kit is for 4" 'OUTER CANNISTER' and consists of 3 pieces 5" Long. 1", 2" and 3" Dia.
You will need to be able to polish the inner and outer surfaces of the tubes and fit your own tube spacers according to the manuals.
The Inner Tubes are 316 Stainless Steel Tubing machined to 5 inch lengths.
Please read on
|
|
'JOE CELL 4" INNER TUBE SET ( 4X8)
|
|
 |
INNER TUBES 8".
This kit is for 4" X 10 inch 'OUTER CANNISTER' and consists of 3 pieces 8" Long. 1", 2" and 3" Dia.
You will need to be able to polish the inner and outer surfaces of the tubes and fit your own tube spacers according to the manuals.
The Inner Tubes are 316 Stainless Steel Tubing machined to
8 inch lengths.
Please read on
|
|
'JOE CELL 5" INNER TUBE SET ( 5X5)
|
|
 |
INNER TUBES: 5"
This kit is for 5" 'OUTER CANNISTER' and consists of 4 pieces 5" Long. 1", 2" 3" and 4" Dia.
You will need to be able to polish the inner and outer surfaces of the tubes and fit your own tube spacers according to the manuals.
The Inner Tubes are 316 Stainless Steel Tubing machined to 5 inch lengths.
Please read on
|
|
'JOE CELL 5" INNER TUBE SET - (5X8)
|
|
 |
INNER TUBES: 5"
This kit is for 5" 'OUTER CANNISTER' and consists of 4 pieces 8" Long. 1", 2" 3" and 4" Dia.
You will need to be able to polish the inner and outer surfaces of the tubes and fit your own tube spacers according to the manuals.
The Inner Tubes are 316 Stainless Steel Tubing machined to
8 inch lengths.
Please read on
|
[1] 2 3 Next Page
|
