|
NUTECH 2000
Current
Category
JOE CELL KITS & MANUALS
|
'CHARGING CELL 5' TUBE SET (5x5)
|
|
 |
'CHARGING CELL - 5 TUBE KIT 5 inch long Tubes. Consists of 1", 2", 3", 4" & 5 inch tubes. This kit is for pre charging the water and seperating the solids from the water to avoid contaminating the engine cell. These tubes are mounted in a glass beaker ( 3Ltr. ) for observation purposes as per the manuals. This cell is essential for observing the nature of different waters and observing all the effects that lead to a stage 3 cell.
Click for more info:
|
|
316 CATHODE STUD KIT
|
|
 |
NEGATIVE ELECTRODE STUD KIT 3.5 inch x 1/2 inch 316 Stainless Steel threaded stud for base mount and cathode connection. * Kit includes Stainless Steel nut to fit in the base of the 1" centre electrode. * 2 x 1/2" Stainless Washers * 2 x Half nuts for electrical connector. * 1 x Insulator Spacer - internal * 1 x Insulator Washer - external
READ ON
|
|
SPACER ROD
|
|
|
JOE CELL SPACER ROD We can supply Acetyl rod that seems to be OK but that is not to say other materials may not be better. Please read note on next page. You will need to cut the rod and fit it for a tight slide fit. The length supplied will be sufficient for one 5 Tube Cell. 30 inches
|
|
LIVING ENERGIES
|
|
 |
Soft cover. 311 pages Author - Callum Coats An Exposition of Concepts Related to the Theories of VIKTOR SCHAUBERGER Published by GATEWAY BOOKS ISBN - 0 946551 97 9
This book is an absolute must for anyone wishing to understand the Magic of Water. Most of thought water was just H2O. It is much more than that and as you unlock the secrets of the Joe Cell you will discover a whole new world of Mystery. Please click more info
|
|
THE WATER WIZARD
|
|
 |
THE EXTRAOPRDINARY PROPERTIES OF NATURAL WATER Soft Cover. 218 pages Translated and edited by Callum Coates Volume one of Eco-Technology More energy is encapsulated in every drop of good spring water than an average-sized power station is presently able to produce - Viktor Schauberger ( 1885 - 1958 ) Another wonderful book unlocking the secrets of water. Highly reccommended. Please click more info:
|
|
NATURE AS TEACHER
|
|
 |
New Principles in the Working of Nature. Soft Cover 180 pages Translated and edited by Callum Coats. Volume two of ECO-TECHNOLOGY.
|
|
MILWAUKEE SM500 REDOX METER
|
|
 |
REDUCTION / OXIDATION - REDOX METER Affordable redox meter with platinum electrode. This meter is essential for the Joe Cell experiments. Know when your water has a negative charge and a good way to measure the water you are collecting. FEATURES:
Range: + 1000 mV Resolution: 1 mV Accuracy + 5mV Battery: 1 x 9V battery Life: 300 hours Environment: 0 - 50 deg C / 95% RH Max
Please click more info
|
|
Milwaukee pH600 tester
|
|
 |
A pH Meter is a very useful tool around the Joe cell experiments as you need to see how your water is changing. Also esential for use with our Water Charging unit. The MILWAUKEE pH 600 is an excellent choice and not too expensive. Quick and relaible pH measurements.
Featuring: * 0.0 to 14 pH * Calibration - Manual 1 point. * Resolution - 0.1 pH * + 0.2 pH Accuracy * Temperature Compensation - Automatic 0 to 50 degrees C. * Battery life - 700 hours
|
|
MILWAUKEE SM 100 pH METER
|
|
 |
A pH Meter is a very useful tool around the Joe cell experiments as you need to see how your water is changing. Also esential for use with our Water Charging unit. The MILWAUKEE pH SM100 for quick and reliable pH measurements. Please read on.
|
|
MILWAUKEE TDS SM401
|
|
 |
CONDUCTIVITY TESTER - TDS Comes with a MA9IOD/1 conductivity probe. This meter is useful for testing waters out in the field to check the conductivity which is best suited for the Joe Cell as well as bench tests and monitering changes in the water.
FEATURES INCLUDE:
* Range: 10 - 1990 ppm * Resolution: 10 ppm * Accuracy: + 2% Full Scale * Calibration: manual 1 point * Battery / Life: 1 X 9V battery / 300 hours * Environment: 0 - 50deg C / 95% RH Max * Callibration: 20ml sachet calibration solution
|
|
pH 7.01 BUFFER SOLUTION
|
|
 |
CALIBRATION BUFFER SOLUTION Re-calibrate your meters by dipping your probe into this solution which is set at pH 7.01
|
|
CONDUCTIVITY CALIBRATION FLUID
|
|
 |
220 ml Bottle. Code M10031B for the SHARP C62 Conductivity Meter Check your calibration for TDS - conductivity. 1413 micro Seimens per cm
|
Previous Page 1 [2] 3 Next Page
|