home
highmileage links
The GEET Fuel Processor
is a self-inducing Plasma generator.
http://www.geet.com/info/self.htm
The first working prototype was developed long
before the technical analysis was attempted. Plasma research
is a fairly new field of acceptable science. At this time most
printed text is from foreign Countries, and a majority from
Russia.
The technology used in the GEET Fuel Processor
is a combination of the most basic scientific principles, most
of which falls within the normal rules and of thermodynamics.
But some of the 70 simultaneous phenomenon are not found in
those books, since it is the combination of events, which is
the body of this discovery. Put quite simply, the exhaust heat
is transferred to the incoming fuel vapor, which must be maintained
in a vacuum, and the overall configuration provides a molecular
breakdown within the vacuum of all of the heavier elements.
Therefore, intensifying the vacuum, the speed of molecular breakdown
or reaction is magnified, and less heat is required.
The GEET Plasma unit generates several "electrical"
fields at the same time while operating, some of which are
in opposite direction and all are affected by the direction
of mass movement as well as by the gravitational field of our
planet. During lectures from coast to coast Paul
and Molley have explained that it is frequency and vibration
that determines the amount of plasma or energy being developed.
Reseach in private laboratories in Europe is helping to isolate
some of the basic field replication of the plasma generator
that the Pantones need for visible demonstrations.
Many attempts to use the external electrical
mechanical devices to enhance the production of Plasma in the
GEET Fuel Processor have all failed to show any promise, such
as the Plasmatron. This has occurred because the outside interference
has opposed the "natural" order of the energy, which must be
self generated to maximize the results, as well as will increase
the charge-discharge at specific needs of demand of the Plasma
- or GEET GAS. It should also be noted that using outside non-natural
heating diminishes the fields which are normally self generated.
The specific movement of vapor within the GEET
Fuel Processor is "focused" to exact flow direction and velocity
being self created thereby maximizing and intensifying the
"field and enhancing the molecular, or atomic disassociation.
Without all other natural elements increasing to equal proportions,
one cannot expect that merely increasing the Arc-Field will
be the main reason for specific success of any given substance
to be broken down to it's base elements. When the ideal Plasma
has been created is the time to begin increasing or decreasing
all parameters involved at their respective equal or balanced
increments to satisfy an increase or decrease in the Plasma
flow. In doing so one can increase the Plasma flow to a viable delivery
state for all commercial use demands. During tests the over-reving
to engines has startled engineers and scientists from around
the world, as engines are sped up to over twice the normal rpm,
and slowed down to a fraction of their normal idle speed, with
no noticeable vibration. Have you ever seen a 350 Chevrolet
idle at 80 rpm? We have.
All of the currently studied Plasma generators,
basically share a design and operational feature in that they
attempt to Push the Fuel, under pressure, into a reaction,
whereby a need for outside energy to force the device to function.
The most unique feature of the GEET Plasma Fuel System is that
by supplying the fuel into the Plasma chamber in a vacuum and
through a longitudinal, natural release, causes a Radial reaction
which is self induced, which creates energy as electrons are
pulled into the reactin of plasma, instead of consuming energy.
Thus the Plasma becomes more "homogenized" with atmospheric
air, causing a well-blended fuel for final delivery.
An additional stabilizing feature within our
system is the natural circulation of opposing masses as a vorticular
motion within the Plasma Field, a condition as described by
Molley Pantone as Thermal momentum-or Inertia. Such field is
caused in part by the chamber beginning before and after the
Field zone. The size of the Field zone must coincide with the
fuel and parameters with specific limitations, dependent on
the fuel demand. Now we should also explaain that a small
unit, such as a 10 hp engine can be used as a "servant" to produce
fuel to be used by an un-modified larger engine or furnace,
by adapting pumps and only modifiying the air intake only.
Thus a 10 hp engine could make the fuel for a locomotive.
The exact length of the Plasma chamber need be
adjustable to fully accommodate rapid change of fuels when
different blends are being used. This is quite simple but requires
some very expensive equipment for analysis of the final exhaust
for the average mechanic.
The "balance " point of a perfectly adjusted
GEET Plasma reaction chamber, will give the same temperature
coming out of the exhaust pipe as the ambient air, as well as
the air quality should be the same or a slight increase of oxygen
coming out of the tailpipe. So far the inventor has accomplished
a 2% increase in oxygen coming out of an internal combustion
using crude oil as fuel and a 3.5% increase using Battery acid
mixed with 80% saltwater. At the higher than ambient oxygen
levels you normally find ice forming on the exhaust pipes as
a normal function of this phenomenon.
When the Plasma field chamber is too short or
too long for the density of the fuel being used, it overheats
the South end and Chills the North end of the reactor, this
also causes the field to consume oxygen, instead of creating
it. The direction and configuration of the heat source is critical
to the proper balance of the reaction to create a Plasma. We
have now learned that down is the same as South in relationship
to using a compass, and therefore North is up.
Other Plasma generators, such as the copy cat
from MIT, which they call the Plasmatron, uses outside applied
power to create heat to run the units, but have extremely limited
use and output, when compared to the GEET system. Since the
power output of Plasma is constant and generates power we can
only assume that it is of a DC nature and is a constant output
which we have not yet attempted to harness. ( hopefully coming
soon.)
There will be a large number of reports dating
back to 1984 that the inventor was not ready to release until
he felt the timing was right. He feels the timing is now right
and these will be posted as soon as possible. If you would
like to share some of your experience with the inventor contact
him at info@geet.com.
For you,
And the World,
Paul & Molley Pantone
Top of page